What is the Correct Blade Position On 2 Blade Mower?

Every homeowner should prioritize maintaining their lawn, and using a 2-blade lawn mower with the proper blade position is a critical part of this. 

Let’s explore the significance of having the proper blade position on 2 blade mower and how it can help you get the best results.

Key Takeaways:

  • Understanding the components and adjustments of a 2-blade mower deck is important for understanding blade position.
  • 2-blade mower decks work well with a 90-degree configuration.
  • Avoid common mistakes when setting the blade position on a 2-blade mower to ensure better mowing results.
What is the Correct Blade Position On 2 Blade

Understanding the Blade Position On 2 Blade Mower

The 2-blade mower deck is a standard choice in the lawnmower industry, favored by professionals who typically set the blades at a 90-degree angle to achieve optimal results.

Positioning the blades perpendicular to each other is especially important when using a timed deck. Most 2-blade mowers offer adjustable settings labeled 1, 2, and 3. With 1 representing the closest blade position and 3 indicating the farthest apart. Proficiency in adjusting the blade position is essential for adapting to various grass types and terrains.

How to Install Correct Blade Position on 2 Blade Mower?

Follow these step-by-step instructions to ensure you install your mower blades correctly:

Step-1: Ensure the mower’s Engine is Powerless 

  • Disconnect the battery for battery-powered mowers and unplug the spark plug cable for gas-powered mowers. 
  • When dealing with gas mowers, keep the filter facing upward to prevent oil saturation.

Step-2: Remove Old Blades

  • Before loosening the blade bolt, secure the old blade with a 2×4″ block of wood. 
  • Put on gloves, then use a standard wrench to turn the bolt counterclockwise.
  • Remove the old blades, taking note of the side marked “up” or any arrows indicating the correct orientation.

Step-3: Inspecting the Old Blade

  • After removing the old mower blade, check for any signs of cracks, damage, or dents on the blade, as these issues can pose future problems. 
  • If you find any of these issues, replacement is necessary.
  • Alternatively, if the blade seems dull but free from significant damage, store it securely for future sharpening and use.

Step-4: Position New Blades

  • Place the new blade on the spindle with the side marked “up” or the arrow facing the same direction as the old blade.
  • Make sure the cutting edge is facing in the direction of rotation.
  •  Before fully tightening the blade, take a moment to check its balance. If it’s not balanced correctly, you could experience strong vibrations while mowing, which might lead to motor and mower deck damage.
  • Now, proceed to tighten the bolt using a combination wrench. Some folks prefer using a torque wrench to ensure they don’t under-tighten or over-tighten it. 
  • Once that’s done, start the engine to see how the blade spins. This step ensures everything is working smoothly and safely for your mowing needs.

Step-5: Repeat for Second Blade

  • Repeat the entire process for the second blade.

Step-6: Safety Check

  • Reconnect the spark plug wire.
  • Start the mower to ensure the blades are installed correctly.
  • If you notice any vibrations or uneven cutting patterns, turn off the mower and recheck the blade installation. 

Common Mistakes to Avoid with Blade Position on a 2-Blade Mower

While understanding the correct Blade position on 2 blade moweris essential for achieving optimal results in your lawn care, there are some common mistakes that you should avoid:

Incorrect Measurement

Ensure accurate blade position measurements to prevent uneven cutting.

Mixing Up Blades

Install the correct blade on each side to maintain balance and protect the mower.

Neglecting Terrain Adjustment

Adjust blade position for different terrains to avoid uneven cutting and mower damage.

Ignoring Grass Height

Adapt blade position to grass height to prevent quick blade dulling and mower damage.

Lack of Blade Maintenance

Regularly maintain blades by sharpening and balancing to ensure efficiency and even cutting.

What to Do to Maintain the Correct Blade Position on 2 Blade Mower

Here are some maintenance tasks you should perform to keep the blades in the correct position on a 2 blade mower:

Sharpen bladesAt least once a year
Check and adjust belt tensionBefore each mowing season and as needed
Clean mower deckAfter each use
Lubricate moving partsAt least once a year

Blade Sharpening

Regularly sharpen the blades to improve cutting performance and extend the mower’s lifespan.

Belt Tension

Check and adjust belt tension as needed to prevent blades from shifting out of position.

Cleaning the Mower Deck

After each use, thoroughly clean the deck to remove debris and rust, ensuring optimal blade positioning for the next mow.


Keep moving parts lubricated to reduce friction, ensure smooth operation, and prevent component wear and tear. Follow the manufacturer’s recommendations for lubrication intervals.

Related Post: Mower Losing Power When Blades are Engaged: Causes and Fixes

Frequently Asked Questions (FAQs)

How does blade position affect the cutting performance of a 2 blade mower?

Blade position on a 2-blade mower deck directly influences cutting height and angle, crucial for even and effective grass cutting. Understanding deck components and adjustments is key to achieving top cutting performance.

What factors should I consider when determining the blade position on a 2 blade mower?

Consider grass height, terrain, and desired cutting height when setting the blade position on a 2-blade mower.

Which direction does a lawn mower blade spin?

A lawn mower blade typically spins counterclockwise, and you can determine the rotation by looking at the discharge chute’s position.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *